Controlling Factors on Oil-water Distribution and Hydrocarbon Accumulation Model in Wanzhuang Area of Langgu Sag

Bo CHEN , Yin-hui ZUO , Jiang-lin HE , Jun-zheng HAN , Zhen-yong ZHOU , Hui-wen ZHANG , Qiong JIE , Yi-shan MENG , Shuo LI , Hai-ying WANG , Cao REN

Science Technology and Engineering ›› 2026, Vol. 26 ›› Issue (31) : 13437 -13449.

PDF
Science Technology and Engineering ›› 2026, Vol. 26 ›› Issue (31) : 13437-13449 DOI: 10.12404/j.issn.1671-1815.2507833
research-article
Controlling Factors on Oil-water Distribution and Hydrocarbon Accumulation Model in Wanzhuang Area of Langgu Sag
Author information +
History +
PDF

Abstract

The Wanzhuang area, a mature exploration area with over 40 years of development in the northern Langgu Sag, is dominated by normal faults. Fault segmentation complicates intraformational oil-water relationships and develops a typical water-over-oil distribution pattern, leading to an ambiguous hydrocarbon accumulation model. To clarify the oil-water distribution controlling factors and hydrocarbon accumulation models of the upper and middle sub-members of the third Shahejie Member, comprehensive analyses were conducted based on exploration data from the A12, B87 and A21 blocks. The hydrocarbon accumulation characteristics were systematically dissected, and the relationships between oil test productivity and key geological parameters including lateral fault sealing capacity, sandbody thickness, caprock thickness and sandbody dip angle were analyzed. The oil-water distribution laws and major accumulation-controlling factors were clarified, and a targeted hydrocarbon accumulation model was established. Reservoir dissection and multivariate fitting of accumulation parameters show that vertical differences in fault-sandbody configurations among various oil groups dominate the water-over-oil phenomenon and hydrocarbon accumulation of the middle sub-member of the third Shahejie Member. For the upper sub-member of the third Shahejie Member, lateral fault sealing and high-dip-angle sandbodies act as the primary controlling factors for reservoir formation. The regional hydrocarbon accumulation model is summarized as follows: hydrocarbons generated from the lower sub-member of the third Shahejie Member and the upper sub-member of the fourth Shahejie Member source rocks migrate vertically along conduit faults, are blocked by overlying caprocks, and diverge into reservoirs around secondary faults. Hydrocarbons further adjust toward structural highs along fault-sandbody migration systems and finally accumulate in effective traps formed by laterally sealed faults and lithologic pinch-outs. The research results provide reliable references for fine exploration in the Wanzhuang area and analogous complex faulted basins.

Graphical abstract

Keywords

oil-water distribution / main controlling factors / fault-sandbody configuration / hydrocarbon accumulation model / Shahejie Formation / Langgu Sag / Wanzhuang Area

Cite this article

Download citation ▾
Bo CHEN, Yin-hui ZUO, Jiang-lin HE, Jun-zheng HAN, Zhen-yong ZHOU, Hui-wen ZHANG, Qiong JIE, Yi-shan MENG, Shuo LI, Hai-ying WANG, Cao REN. Controlling Factors on Oil-water Distribution and Hydrocarbon Accumulation Model in Wanzhuang Area of Langgu Sag. Science Technology and Engineering, 2026, 26(31): 13437-13449 DOI:10.12404/j.issn.1671-1815.2507833

登录浏览全文

4963

注册一个新账户 忘记密码

References

Funding

PDF (23059KB)

0

Accesses

0

Citation

Detail

Sections
Recommended

/

〈 〉