The transformation of sludge into biochar adsorbents for the removal of tetracycline contaminants in water bodies represents one of the effective approaches for the resource utilization of sludge and enables the realization of the circular economy concept of "treating waste with waste". Municipal sludge was employed as the raw material, and sludge biochar was fabricated through pyrolysis for the adsorption and removal of tetracycline. The adsorption and removal efficacy of tetracycline was investigated, and the preparation conditions of sludge biochar and adsorption environmental conditions were optimized. Additionally, by combining methods such as scanning electron microscopy, infrared spectroscopy, and BET(Brunauer, Emmett, Teller) specific surface area testing, the structural characteristics of sludge biochar and the underlying mechanism of its adsorption behavior towards tetracycline were explored. The results indicate that the sludge biochar prepared under a pyrolysis temperature of 800 ℃ and a pyrolysis duration of 4 hours exhibits the optimal adsorption performance for tetracycline. The pH value exerts a significant influence on the adsorption effect. In a weakly acidic environment, the adsorption effect of sludge biochar on tetracycline is the most favorable, with a maximum adsorption capacity reaching 45.33 mg/g. Thermodynamic and kinetic analyses demonstrate that the pseudo-second-order kinetic model and the Langmuir adsorption isotherm model can appropriately fit the adsorption process of tetracycline by sludge biochar. The adsorption process is primarily monolayer adsorption, dominated by surface chemical adsorption. In conjunction with the analysis of characterization test results, the chemical adsorption mainly involves processes such as electrostatic attraction, cation exchange, complex precipitation, π-π conjugation, and hydrogen bonding. Simultaneously, the pore structure characteristics of sludge biochar result in the adsorption process of tetracycline also encompassing pore filling and Van der Waals force.