Creep Tests on Aerated Inflation Controlled Anchors

Zhuang XIONG , Xue-xiang YANG , Ji-min FAN

Science Technology and Engineering ›› 2024, Vol. 24 ›› Issue (26) : 11385 -11392.

PDF
Science Technology and Engineering ›› 2024, Vol. 24 ›› Issue (26) : 11385-11392 DOI: 10.12404/j.issn.1671-1815.2400714
research-article
Creep Tests on Aerated Inflation Controlled Anchors
Author information +
History +
PDF

Abstract

In order to study the mechanical properties of aerated inflation controlled anchor under long-term load, the creep test of aerated inflation controlled anchor was carried out in outdoor natural site. The test data were processed by Chen's method, and the displacement-time curve, isochronous load-displacement curve and stiffness regression curve were drawn. The creep law of aerated inflation controlled anchor was analyzed. The results show that under the same air pressure, when the applied load is less than 40% of its ultimate uplift bearing capacity. The inflatable anchor basically does not creep. The creep characteristics of inflatable anchors under different air pressures are different. At low air pressure, there are only two stages of deceleration creep and stable creep. When the air pressure is high, there are three stages of deceleration creep, stable creep and accelerated creep. Based on the Burgers model, the long-term uplift bearing capacity of the aerated inflation controlled anchor is 65% ~ 75% of its ultimate uplift bearing capacity by using the isochronous curve method and the transition creep method.

Keywords

aerated inflation controlled anchors / creep experiment / long-term pull-out resistance / burgers model

Cite this article

Download citation ▾
Zhuang XIONG, Xue-xiang YANG, Ji-min FAN. Creep Tests on Aerated Inflation Controlled Anchors. Science Technology and Engineering, 2024, 24(26): 11385-11392 DOI:10.12404/j.issn.1671-1815.2400714

登录浏览全文

4963

注册一个新账户 忘记密码

References

Funding

PDF (7195KB)

18

Accesses

0

Citation

Detail

Sections
Recommended

/

〈 〉