电动轮椅集成化电子刹车的性能

孙祝兵 ,  陈彬彬 ,  周亮 ,  苏芮 ,  胡亮 ,  付新

科学技术与工程 ›› 2026, Vol. 26 ›› Issue (31) :13482-13490

PDF (6004KB)
科学技术与工程 ›› 2026, Vol. 26 ›› Issue (31) :13482-13490 DOI: 10.12404/j.issn.1671-1815.2508541
论文:机械、仪表工业

电动轮椅集成化电子刹车的性能

作者信息 +

Integrated Electronic Braking Performance of Electric Wheelchairs

Author information +
文章历史 +

摘要

针对电动轮椅刹车装置安全性问题,设计了一款集成式电动轮椅刹车装置,省去常规电磁刹车电动轮椅刹车装置的减速装置,提升了刹车装置的响应速度、制动精度和使用寿命。根据电动轮椅的结构,分析了轮子在行走过程中的力学模型,建立了轮子与地面之间的作用力和刹车力模型,明确了轮子在行走过程中的主要受力参数和摆动角度。设计了电动轮椅电子刹车控制器,该控制器主要包含比例积分(proportionalintegral,PI)转速外环(在刹车控制中参考转速ω*=0)与PI电流内环,并最终通过空间矢量脉宽调制算法(space vector pulse width modulation,SVPWM)计算出三相逆变器的控制信号控制刹车力矩的输出,实现电动轮椅行走速度的平稳调节。对电子刹车电动轮椅和电磁刹车电动轮椅的刹车性能进行了对比实验,通过对比两款电动轮椅在平路、3°坡度路面、6°坡度路面三种工况下初始速度与刹车距离之间的关系,可以看出电子刹车电动轮椅的刹车距离均小于电磁刹车电动轮椅。此外,在水泥路面与柏油路面两种路况下,设置负载等级为100 kg和70 kg进行刹车测试,电子刹车电动轮椅的电机电流更低,稳定性更强。综上所述,配备电子刹车系统的电动轮椅在制动过程中具备明确的技术优势。

Abstract

An integrated braking device for electric wheelchairs was designed in response to the safety issues of the braking device for electric wheelchairs, the deceleration device of conventional wheelchair braking devices was eliminated, and the response speed, braking accuracy, and service life of the braking device were thereby enhanced. Based on the structure of the electric wheelchair, the mechanical model of the wheel during the walking process was analyzed, the force model between the wheel and the ground and the braking force model were established, and the main force parameters and swing angles of the wheel during the walking process were clarified. An electronic brake controller for electric wheelchairs was designed. This controller primarily comprised a PI(proportionalintegral) speed outer loop (the reference speed ω*=0during brake control) and a PI current inner loop, ultimately giving the control signal of the three-phase inverter to control brake torque by the space vector pulse width modulation (SVPWM) algorithm, which could achieve smooth adjustment of the electric wheelchair's speed. Comparative experiments were conducted on the braking performance of electric wheelchairs with electronic brake and electromagnetic brake respectivly. By comparing the relationship between initial speed and braking distance of the two kinds of electric wheelchairs under three working conditions: flat road, 3° slope road, and 6° slope road, it could be observed that the braking distance of the electric wheelchair with electronic brakes was shorter than that of the electric wheelchair with electromagnetic brakes. Furthermore, brake tests were also performed with load levels of 100 kg and 70 kg on both cement and asphalt pavement, which demonstrated that the motor current of the electric wheelchair with electronic brakes was lower and the stability was stronger. To sum up, electric wheelchairs with electronic braking systems possess notable technical advantages during the braking process.

Graphical abstract

关键词

电动轮椅 / 电子刹车 / 减速装置 / 刹车力矩

Key words

electric wheelchair / electronic brake / deceleration device / braking torque

引用本文

引用格式 ▾
孙祝兵, 陈彬彬, 周亮, 苏芮, 胡亮, 付新. 电动轮椅集成化电子刹车的性能[J]. 科学技术与工程, 2026, 26(31): 13482-13490 DOI:10.12404/j.issn.1671-1815.2508541
SUN Zhu-bing, CHEN Bin-bin, ZHOU Liang, SU Rui, HU Liang, FU Xin. Integrated Electronic Braking Performance of Electric Wheelchairs[J]. Science Technology and Engineering, 2026, 26(31): 13482-13490 DOI:10.12404/j.issn.1671-1815.2508541

登录浏览全文

4963

注册一个新账户 忘记密码

目前,随着中国人口老龄化程度不断加深,促进了“银发经济”的发展,老龄产业的消费需求逐渐释放[1-3]。作为老年人出行的必要装备,电动轮椅在老年人的生活中变得越来越重要,同时也凸显了一个重要问题,就是电动轮椅的安全性。而电子刹车作为电动轮椅的重要组成部分,其主要功能是控制轮椅启停、坡道驻车和动态制动,可以有效地解决电动轮椅在行进中的平稳性,从而保证电动轮椅在运行中人员的安全性[4-5]。
电动轮椅主要由电池、控制器、车架、座椅、脚踏组件、轮胎、电机等几个部分组成。电池作为电动轮椅的动力源,通常为铅酸电池或者锂电池,其容量决定了电动轮椅的续航里程。控制器能够根据驾驶人员的操作指令产生相应控制信号调节电机的转动,控制电动轮椅的移动,如前进、后退、转向、加速、减速和刹车等;此外,随着技术的进步,许多先进控制器还具备了防倾斜、防撞、与手机等智能设备通信、自动调节运行参数等功能,因而控制器性能直接影响电动轮椅的安全性、舒适性及使用寿命。刹车系统的主要依据控制器实现电动轮椅的车速控制和停车,常规电动轮椅安装的刹车装置主要有机械刹车和电磁刹车装置。
机械刹车主要是采用手刹闸或侧孔螺定装置来实现制动,且需要手动操作实现驻车等功能。缺点就是需要人工手动操作,且制动能力有限,同时需要经常维护保养;因而对于老年人或行动能力受限的成人来说不是特别友好。而电磁刹车装置是一种利用电磁力产生制动力矩的装置,电信号传输速度极快,可以实现毫秒级的精确制动,具有定位精确和响应速度快的优点,但一旦电力供应中断或控制系统故障,刹车功能可能丧失。王延伟等[6]设计了一套电动轮椅的辅助安全系统,采用不同的控制策略对电磁制动系统及轮椅电机进行控制,实现坡道防溜车功能;同时采集电动轮椅与障碍物距离信息,判断并控制轮椅电机和电磁制动系统,使电动轮椅快速实现主动制动,从而保证人员的安全。
电子刹车技术主要是通过电子元件控制电机转矩降低车速。电机为电动轮椅运动提供重要的驱动力,根据控制器发出的指令驱动车轮转动,实现电动轮椅的各种动作。可以看出,电机及其驱动技术是电动轮椅的核心技术之一,其发展推动着电动轮椅产品朝着智能化、模块化、轻量化的方向不断升级换代。电子刹车系统具有响应速度快、精度高、寿命长、电机成本低等优点,相比机械刹车和电磁刹车装置,电子刹车可以提供更高的制动精度,允许驾驶员进行更精细的操控,从而更好地控制轮椅的速度和停止位置;且没有传统的摩擦片或其他机械结构,电子刹车系统的寿命通常比电磁刹车长,且不需要频繁的维护。使用电子刹车的电机无需增加外部硬件,减少了电磁刹车带来的成本,因此降低了产品的整体成本。断电时可以实现刹车,但释放过程中需要电力,故需要在电池控制系统中设定一定的安全电力保护,防止电池完全耗尽后产生的故障。郎召伟等[7]设计了一种可实现自动把持和解除传动线系的电磁制动器,基于电磁制动器中电路、磁通变化规律,分析了电路模型和磁通动态特性,建立了刹车过程机械运动数学模型,并利用算例验证了制动模型的合理性及有限元分析的正确性。但常规的电动轮刹车装置设计比较冗余,控制器已出现bug或死机的风险,因而严重降低了电动轮椅行驶的安全性。
针对电动轮椅的电子刹车装置进行研究,省去了传统电子刹车装置电机与车轮之间的减速装置,根据电机转动的方向,控制器通过改变了电机转子受到的电磁力方向,从而产生制动力矩,实现制动;并利用霍尔传感器判断电机的状态,确定是否增加制动力矩,降低电机转动的趋势,直到电机停止转动。同时分析了轮子的行走模型,建立了轮子与地面之间的接触力和摩擦力模型,测试了该电动轮椅刹车装置在不同地面角度下的刹车距离和刹车时间,明确了其相对于常规电动轮椅的优势,从而为该电动轮椅的广泛应用奠定基础。

1 电子刹车动力学模型

1.1 电动轮椅轮子行走的模型

假设轮椅垂直载荷为定值,忽略轮椅垂向运动与行驶向运动的耦合作用,轮椅刹车走步的非线性动力学模型如图1所示。可描述[8]为

$({\mathit{m}}_{\mathrm{a}}+\mathit{m}){\stackrel{·}{\mathit{v}}}_{\mathrm{a}}-{\mathit{J}}_{\mathit{\theta }}\stackrel{··}{\mathit{\theta }}={\mathit{F}}_{\mathit{x}}-{\mathit{F}}_{\mathrm{d}\mathrm{r}\mathrm{a}\mathrm{g}}$
${\mathit{J}}_{\stackrel{·}{\mathit{\theta }}}\stackrel{··}{\mathit{\theta }}-{\mathit{J}}_{\mathit{\theta }}{\stackrel{·}{\mathit{v}}}_{\mathrm{a}}+{\mathit{C}}_{\mathit{\theta }}\stackrel{·}{\mathit{\theta }}+{\mathit{K}}_{\mathit{\theta }}\mathit{\theta }={\mathit{L}}_{\mathrm{c}}{\mathit{F}}_{\mathit{x}}$
${\mathit{J}}_{\mathrm{w}}\stackrel{·}{\mathit{\omega }}=\mathit{r}{\mathit{F}}_{\mathit{x}}-{\mathit{T}}_{\mathrm{b}}$
${\mathit{J}}_{\mathit{\theta }}=\frac{{\mathit{L}}_{\mathrm{c}}{\mathit{m}}_{\mathrm{c}}}{2}+{\mathit{L}}_{\mathrm{c}}{\mathit{m}}_{\mathrm{c}}$
${\mathit{J}}_{\stackrel{··}{\mathit{\theta }}}={\mathit{J}}_{\mathrm{c}}+\frac{{\mathit{L}}_{\mathrm{c}}^{2}{\mathit{m}}_{\mathrm{c}}}{4}+{\mathit{L}}_{\mathrm{c}}^{2}{\mathit{m}}_{\mathrm{c}}$

式中:ma为整车当量质量;m为轮椅轮子质量;va为整车前向运动速度;Jw为轮椅轮子围绕轴向的转动惯量;Tb为刹车力矩;Cθ为支撑车架前向阻尼;Lc为轮椅轮子与整车的连杆长度即支撑架支柱等效高度;θ为支撑车架绕整车连接处的振动角度;ω为轮椅轮子转速;r为轮胎滚动半径;Fx为地面对轮胎的前向力;Kθ为支撑车架前向刚度;Fdrag为空气阻力,与轮椅启动速度的平方成正比;mc为支撑车架的等效集中质量。

1.2 轮子与地面的作用力模型

轮椅垂直载荷(z向)分布如图2所示,其分布模型[9-10]为

$\begin{array}{c}{\mathit{F}}_{\mathit{z}1}=\frac{1}{2}\mathit{m}\left(\frac{{\mathit{L}}_{2}}{\mathit{L}}-\frac{{\mathit{a}}_{\mathit{x}}\mathit{h}}{\mathit{g}\mathit{L}}\right)\mathit{g}-\mathit{m}\left(\frac{{\mathit{L}}_{2}}{\mathit{L}}-\frac{{\mathit{a}}_{\mathit{x}}\mathit{h}}{\mathit{g}\mathit{L}}\right)\frac{{\mathit{a}}_{\mathit{y}}\mathit{h}}{{\mathit{E}}_{1}}\end{array}$

式(6)中:L1为重心至前轮中心距离;L2为重心至后轮中心距离;L为轴距;h为轮椅重心的高度;ax为x轴方向加速度;ay为y轴方向加速度;g为重力加速度;E1为轮椅左右两侧前轮的轮距。考虑到轮椅行驶道路坡度和平整度不同,将轮椅行驶的加速度与重力加速度区分开来。

在不同道路情况下,测得的加速度包含两部分,一部分是由车辆运动引起的,即axmove、aymove、azmove;另一部分是由重力引起的,即axg、ayg、azg。为简化垂直力的计算,将不同道路情况转换为等效的水平道路情况,其等效加速度为

${\mathit{a}}_{\mathit{x}\mathrm{e}\mathrm{q}\mathrm{u}}={\mathit{a}}_{\mathit{x}\mathrm{m}\mathrm{o}\mathrm{v}\mathrm{e}}+{\mathit{a}}_{\mathit{x}\mathit{g}}$
${\mathit{a}}_{\mathit{y}\mathrm{e}\mathrm{q}\mathrm{u}}={\mathit{a}}_{\mathit{y}\mathrm{m}\mathrm{o}\mathrm{v}\mathrm{e}}+{\mathit{a}}_{\mathit{y}\mathit{g}}$
${\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}=-{\mathit{a}}_{\mathit{z}\mathrm{m}\mathrm{o}\mathrm{v}\mathrm{e}}+{\mathit{a}}_{\mathit{z}\mathit{g}}$

依据载荷转移理论,垂直力方程变为

$\begin{array}{l}{\mathit{F}}_{\mathit{z}1}=\frac{1}{2}\mathit{m}\left(\frac{{\mathit{L}}_{2}}{\mathit{L}}-\frac{{\mathit{a}}_{\mathit{x}\mathrm{e}\mathrm{q}\mathrm{u}}\mathit{h}}{{\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}\mathit{L}}\right){\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}-\\ \mathit{m}\left(\frac{{\mathit{L}}_{2}}{\mathit{L}}-\frac{{\mathit{a}}_{\mathit{x}\mathrm{e}\mathrm{q}\mathrm{u}}\mathit{h}}{{\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}\mathit{L}}\right)\frac{{\mathit{a}}_{\mathit{y}\mathrm{e}\mathrm{q}\mathrm{u}}\mathit{h}}{{\mathit{E}}_{1}}\end{array}$

使用加速度计测量轮椅运动和重力引起的加速度之和,但其测量值会受到俯仰角和侧倾角的影响,因此需要将加速度计的坐标旋转至与道路平行。等效加速度可根据加速度计测得的数据计算[11-12],公式为

$\left(\begin{array}{l}{\mathit{a}}_{\mathit{x}\mathrm{e}\mathrm{q}\mathrm{u}}\\ {\mathit{a}}_{\mathit{y}\mathrm{e}\mathrm{q}\mathrm{u}}\\ {\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}\end{array}\right)={\mathit{A}}_{\mathit{\alpha }}{\mathit{A}}_{\mathit{\beta }}\left(\begin{array}{l}{\mathit{a}}_{\mathit{x}\mathrm{m}}\\ {\mathit{a}}_{\mathit{y}\mathrm{m}}\\ {\mathit{a}}_{\mathit{z}\mathrm{m}}\end{array}\right)$
${\mathit{A}}_{\mathit{\alpha }}=\left(\begin{array}{lll}1& 0& 0\\ 0& \mathrm{c}\mathrm{o}\mathrm{s}{\mathit{\alpha }}_{\mathrm{v}}& -\mathrm{s}\mathrm{i}\mathrm{n}{\mathit{\alpha }}_{\mathrm{v}}\\ 0& \mathrm{s}\mathrm{i}\mathrm{n}{\mathit{\alpha }}_{\mathrm{v}}& \mathrm{c}\mathrm{o}\mathrm{s}{\mathit{\alpha }}_{\mathrm{v}}\end{array}\right)$
${\mathit{A}}_{\mathit{\beta }}=\left(\begin{array}{lll}\mathrm{c}\mathrm{o}\mathrm{s}{\mathit{\beta }}_{\mathrm{v}}& 0& \mathrm{s}\mathrm{i}\mathrm{n}{\mathit{\beta }}_{\mathrm{v}}\\ 0& 1& 0\\ -\mathrm{s}\mathrm{i}\mathrm{n}{\mathit{\beta }}_{\mathrm{v}}& 0& \mathrm{c}\mathrm{o}\mathrm{s}{\mathit{\beta }}_{\mathrm{v}}\end{array}\right)$

式中:αv和βv分别为轮椅承载最大重量时的俯仰角和侧倾角;axm、aym、azm为通过加速度计测得的加速度。将测得的加速度通过旋转矩阵转换,可把不同道路角度与不平整道路工况换算为等效水平道路条件。

现假设载荷的偏转由车架受到的力矩引起[13-14]。由图3可见,在侧倾运动时,车架的力矩为Mα,根据力矩平衡,有

${\mathit{F}}_{\mathit{z}1}+{\mathit{F}}_{\mathit{z}2}+{\mathit{F}}_{\mathit{z}3}+{\mathit{F}}_{\mathit{z}4}={\mathit{m}}_{\mathrm{v}}{\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}$
$({\mathit{F}}_{\mathit{z}1}+{\mathit{F}}_{\mathit{z}2}){\mathit{L}}_{1}-({\mathit{F}}_{\mathit{z}3}+{\mathit{F}}_{\mathit{z}4}){\mathit{L}}_{2}={\mathit{M}}_{\mathit{\alpha }}$

式中:mv为轮椅车身质量,在俯仰运动时,车架的力矩为Mβ,根据力矩平衡,有

$\begin{array}{c}{\mathit{F}}_{\mathit{z}1}\frac{{\mathit{E}}_{1}}{2}-{\mathit{F}}_{\mathit{z}2}\frac{{\mathit{E}}_{1}}{2}={\mathit{M}}_{\mathit{\beta }}\left(\frac{{\mathit{F}}_{\mathit{z}1}+{\mathit{F}}_{\mathit{z}2}}{{\mathit{F}}_{\mathit{z}1}+{\mathit{F}}_{\mathit{z}2}+{\mathit{F}}_{\mathit{z}3}+{\mathit{F}}_{\mathit{z}4}}\right)\end{array}$

式中:E1、E2分别为轮椅两个前轮和两个后轮的轮距。

$\begin{array}{c}{\mathit{F}}_{\mathit{z}3}\frac{{\mathit{E}}_{2}}{2}-{\mathit{F}}_{\mathit{z}2}\frac{{\mathit{E}}_{2}}{2}={\mathit{M}}_{\mathit{\beta }}\left(\frac{{\mathit{F}}_{\mathit{z}3}+{\mathit{F}}_{\mathit{z}4}}{{\mathit{F}}_{\mathit{z}1}+{\mathit{F}}_{\mathit{z}2}+{\mathit{F}}_{\mathit{z}3}+{\mathit{F}}_{\mathit{z}4}}\right)\end{array}$

在同时存在俯仰和侧倾运动的情况下,车架的力矩计算公式为

${\mathit{M}}_{\mathit{\alpha }}={\mathit{K}}_{\mathrm{r}}\mathit{\alpha }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\alpha }}$
${\mathit{M}}_{\mathit{\beta }}={\mathit{K}}_{\mathrm{r}}\mathit{\beta }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\beta }}$

式中:Kr为等效总旋转刚度;Cr为等效总阻尼系数。

综合式(14)~式(19),四个车轮的垂直力可近似表示[15-16]为

$\begin{array}{l}{\mathit{F}}_{\mathit{z}1}=\frac{{\mathit{m}}_{\mathrm{v}}{\mathit{L}}_{2}{\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}}{2\mathit{L}}-\frac{{\mathit{L}}_{2}({\mathit{K}}_{\mathrm{r}}\mathit{\beta }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\beta }})}{\mathit{L}{\mathit{E}}_{1}}+\\ \frac{{\mathit{K}}_{\mathrm{r}}\mathit{\alpha }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\alpha }}}{2\mathit{L}}-\frac{{\mathit{M}}_{\mathit{\beta }}{\mathit{M}}_{\mathit{\alpha }}}{{\mathit{m}}_{\mathrm{v}}{\mathit{a}}_{\mathit{z}\mathrm{r}}\mathit{L}{\mathit{E}}_{1}}\end{array}$
$\begin{array}{l}{\mathit{F}}_{\mathit{z}2}=\frac{{\mathit{m}}_{\mathrm{v}}{\mathit{L}}_{2}{\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}}{2\mathit{L}}+\frac{{\mathit{L}}_{2}({\mathit{K}}_{\mathrm{r}}\mathit{\beta }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\beta }})}{\mathit{L}{\mathit{E}}_{1}}+\\ \frac{{\mathit{K}}_{\mathrm{r}}\mathit{\alpha }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\alpha }}}{2\mathit{L}}+\frac{{\mathit{M}}_{\mathit{\beta }}{\mathit{M}}_{\mathit{\alpha }}}{{\mathit{m}}_{\mathrm{v}}{\mathit{a}}_{\mathit{z}\mathrm{r}}\mathit{L}{\mathit{E}}_{1}}\end{array}$
$\begin{array}{l}{\mathit{F}}_{\mathit{z}3}=\frac{{\mathit{m}}_{\mathrm{v}}{\mathit{L}}_{1}{\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}}{2\mathit{L}}-\frac{{\mathit{L}}_{1}({\mathit{K}}_{\mathrm{r}}\mathit{\beta }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\beta }})}{\mathit{L}{\mathit{E}}_{2}}-\\ \frac{{\mathit{K}}_{\mathrm{r}}\mathit{\alpha }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\alpha }}}{2\mathit{L}}+\frac{{\mathit{M}}_{\mathit{\beta }}{\mathit{M}}_{\mathit{\alpha }}}{{\mathit{m}}_{\mathrm{v}}{\mathit{a}}_{\mathit{z}\mathrm{r}}\mathit{L}{\mathit{E}}_{2}}\end{array}$
$\begin{array}{l}{\mathit{F}}_{\mathit{z}4}=\frac{{\mathit{m}}_{\mathrm{v}}{\mathit{L}}_{1}{\mathit{a}}_{\mathit{z}\mathrm{e}\mathrm{q}\mathrm{u}}}{2\mathit{L}}+\frac{{\mathit{L}}_{1}({\mathit{K}}_{\mathrm{r}}\mathit{\beta }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\beta }})}{\mathit{L}{\mathit{E}}_{2}}-\\ \frac{{\mathit{K}}_{\mathrm{r}}\mathit{\alpha }+{\mathit{C}}_{\mathrm{r}}\stackrel{·}{\mathit{\alpha }}}{2\mathit{L}}-\frac{{\mathit{M}}_{\mathit{\beta }}{\mathit{M}}_{\mathit{\alpha }}}{{\mathit{m}}_{\mathrm{v}}{\mathit{a}}_{\mathit{z}\mathrm{r}}\mathit{L}{\mathit{E}}_{2}}\end{array}$

1.3 刹车力的建模

摩擦建模通常具有强非线性且依赖多种变量,因此摩擦建模通常非常复杂。因此,采用简化近似的方式,将摩擦力表征为黏性摩擦和库仑摩擦的组合,表示[17]为

${\mathit{f}}_{\mathit{\epsilon }}={\mathit{\mu }}_{\mathrm{v}\mathrm{s}\mathrm{c}}\mathit{\epsilon }+{\mathit{\mu }}_{\mathrm{c}\mathrm{m}\mathrm{b}}\mathit{M}\mathit{g}\mathrm{s}\mathrm{g}\mathrm{n}\left(\mathit{\epsilon }\right)$

式(24)中:μvsc和μcmb分别为黏性摩擦系数和库伦摩擦系数;M=Mw+Mp(Mw为轮椅质量,Mp为使用者质量);$\stackrel{·}{\mathit{x}}\mathit{、}\stackrel{·}{\mathit{y}}$为轮椅质心的线速度;$\stackrel{·}{\mathit{\theta }}$为角速度;$\mathit{\varphi }$为道路坡角;ε为轮椅的滑移速度。由于轮椅的速度相对较小,可确定其库伦摩擦远大于黏性摩擦,因此可忽略黏性摩擦以简化模型。由于存在sgn(ε),当轮椅的滑移速度ε=0时,方程为非线性,且方程不可微。但由于需要连续且可微的轮椅摩擦模型,故引入平滑系数k,提出以下近似[18]等式

$\mathrm{s}\mathrm{g}\mathrm{n}\left(\mathit{\epsilon }\right)\approx \frac{2}{\mathrm{\pi }}\mathrm{a}\mathrm{r}\mathrm{c}\mathrm{t}\mathrm{a}\mathrm{n}\left(\mathit{k}\mathit{\epsilon }\right)$

由于$\underset{\mathit{k}\to \mathit{\infty }}{\mathrm{l}\mathrm{i}\mathrm{m}}\frac{2}{\mathrm{\pi }}\mathrm{a}\mathrm{r}\mathrm{c}\mathrm{t}\mathrm{a}\mathrm{n}\left(\mathit{k}\mathit{\epsilon }\right)=\mathrm{s}\mathrm{g}\mathrm{n}\left(\mathit{\epsilon }\right),\mathit{ }\mathit{k}\gg 1$,作用于轮椅质心的摩擦力可表示为矩阵形式[19],即

$\mathit{F}=\frac{2}{\mathrm{\pi }}\mathit{M}\mathit{g}\mathrm{c}\mathrm{o}\mathrm{s}\mathit{\varphi }\left[\begin{array}{l}\mathit{\mu }{\mathit{X}}_{\mathrm{m}\mathrm{a}\mathrm{x}}\mathrm{a}\mathrm{r}\mathrm{c}\mathrm{t}\mathrm{a}\mathrm{n}\left(\mathit{k}\stackrel{·}{\stackrel{\sim }{\mathit{x}}}\mathit{g}\right)\\ \mathit{\mu }{\mathit{Y}}_{\mathrm{m}\mathrm{a}\mathrm{x}}\mathrm{a}\mathrm{r}\mathrm{c}\mathrm{t}\mathrm{a}\mathrm{n}\left(\mathit{k}\stackrel{·}{\stackrel{\sim }{\mathit{y}}}\mathit{g}\right)\\ \mathit{ }\mathit{ }\mathit{ }0\\ \mathit{\mu }{\mathit{\theta }}_{\mathrm{m}\mathrm{a}\mathrm{x}}\mathrm{a}\mathrm{r}\mathrm{c}\mathrm{t}\mathrm{a}\mathrm{n}\left(\mathit{k}\stackrel{·}{\stackrel{\sim }{\mathit{\theta }}}\right)\end{array}\right]$

式(26)中:$\stackrel{·}{\stackrel{\sim }{\mathit{x}}}$为轮椅质心沿X方向的平动滑移速度;$\stackrel{·}{\stackrel{\sim }{\mathit{y}}}$为轮椅质心沿Y方向的平动滑移速度;$\stackrel{·}{\stackrel{\sim }{\mathit{\theta }}}$为轮椅绕质心的转动滑移角速度;μ为摩擦系数。

2 控制器设计

本文研究中的电动轮椅电机为三相电机,其在三相静止坐标系下的电流、电压及磁链是相互耦合的,数学模型较为复杂,不利于控制策略设计。通过相应的坐标系变换将其转换到两相旋转坐标系中,可以将上述变量解耦,使控制策略更易于理解和实现。电机坐标系变换包括由三相静止坐标系变换到两相静止坐标系的Clark变换和由两相静止坐标系变换到两相旋转坐标系的Park变换。

Clark变换的数学表达式为

$\left\{\begin{array}{l}{\mathit{N}}_{2}{\mathit{i}}_{\mathit{\alpha }}={\mathit{N}}_{3}{\mathit{i}}_{\mathit{A}}-{\mathit{N}}_{3}{\mathit{i}}_{\mathit{B}}\mathrm{c}\mathrm{o}\mathrm{s}\left(\frac{2\mathrm{\pi }}{3}\right)-{\mathit{N}}_{3}{\mathit{i}}_{\mathit{C}}\mathrm{c}\mathrm{o}\mathrm{s}\left(\frac{2\mathrm{\pi }}{3}\right)\\ {\mathit{N}}_{2}{\mathit{i}}_{\mathit{\beta }}={\mathit{N}}_{3}{\mathit{i}}_{\mathit{B}}\mathrm{s}\mathrm{i}\mathrm{n}\left(\frac{2\mathrm{\pi }}{3}\right)-{\mathit{N}}_{3}{\mathit{i}}_{\mathit{C}}\mathrm{s}\mathrm{i}\mathrm{n}\left(\frac{2\mathrm{\pi }}{3}\right)\\ {\mathit{N}}_{2}{\mathit{i}}_{\mathit{o}}=\frac{1}{2}({\mathit{N}}_{3}{\mathit{i}}_{\mathit{A}}+{\mathit{N}}_{3}{\mathit{i}}_{\mathit{B}}+{\mathit{N}}_{3}{\mathit{i}}_{\mathit{C}})\end{array}\right.$

对应的矩阵形式为

$\left[\begin{array}{l}{\mathit{i}}_{\mathit{\alpha }}\\ {\mathit{i}}_{\mathit{\beta }}\\ {\mathit{i}}_{\mathit{o}}\end{array}\right]=\frac{{\mathit{N}}_{3}}{{\mathit{N}}_{2}}\left[\begin{array}{lll}1& -\frac{1}{2}& -\frac{1}{2}\\ 0& \frac{\sqrt{3}}{2}& -\frac{\sqrt{3}}{2}\\ \frac{1}{2}& \frac{1}{2}& \frac{1}{2}\end{array}\right]\left[\begin{array}{l}{\mathit{i}}_{\mathit{A}}\\ {\mathit{i}}_{\mathit{B}}\\ {\mathit{i}}_{\mathit{C}}\end{array}\right]$

式中:iA、iB、iC分别为三相静止坐标系A、B、C对应轴上的电流;iα、iβ分别为两相静止坐标系α、β对应轴上的电流;io代表零序电流,在三相对称时,io=0;N2、N3为绕组匝数,且当采用等幅值变换时,$\frac{{\mathit{N}}_{3}}{{\mathit{N}}_{2}}=\frac{2}{3}$,当采用等功率变换时,$\frac{{\mathit{N}}_{3}}{{\mathit{N}}_{2}}=\sqrt{\frac{2}{3}}$。

Park变换的数学表达式为

$\left\{\begin{array}{l}{\mathit{N}}_{2}{\mathit{i}}_{\mathit{d}}={\mathit{N}}_{2}{\mathit{i}}_{\mathit{\alpha }}\mathrm{c}\mathrm{o}\mathrm{s}{\mathit{\theta }}_{\mathrm{e}}+{\mathit{N}}_{2}{\mathit{i}}_{\mathit{\beta }}\mathrm{s}\mathrm{i}\mathrm{n}{\mathit{\theta }}_{\mathrm{e}}\\ {\mathit{N}}_{2}{\mathit{i}}_{\mathit{q}}=-{\mathit{N}}_{2}{\mathit{i}}_{\mathit{\alpha }}\mathrm{s}\mathrm{i}\mathrm{n}{\mathit{\theta }}_{\mathrm{e}}+{\mathit{N}}_{2}{\mathit{i}}_{\mathit{\beta }}\mathrm{c}\mathrm{o}\mathrm{s}{\mathit{\theta }}_{\mathrm{e}}\end{array}\right.$

对应的矩阵形式为

$\left[\begin{array}{l}{\mathit{i}}_{\mathit{d}}\\ {\mathit{i}}_{\mathit{q}}\end{array}\right]=\left[\begin{array}{ll}\mathrm{c}\mathrm{o}\mathrm{s}{\mathit{\theta }}_{\mathrm{e}}& \mathrm{s}\mathrm{i}\mathrm{n}{\mathit{\theta }}_{\mathrm{e}}\\ -\mathrm{s}\mathrm{i}\mathrm{n}{\mathit{\theta }}_{\mathrm{e}}& \mathrm{c}\mathrm{o}\mathrm{s}{\mathit{\theta }}_{\mathrm{e}}\end{array}\right]\left[\begin{array}{l}{\mathit{i}}_{\mathit{\alpha }}\\ {\mathit{i}}_{\mathit{\beta }}\end{array}\right]$

式中:θe为d轴和α轴之间的电气角度;id、iq为两相旋转坐标系d、q轴上的电流。

在两相旋转坐标系下,电动轮椅电机的电流方程和运动方程分别为

$\left\{\begin{array}{l}{\mathit{u}}_{\mathit{d}}=\mathit{L}\frac{\mathrm{d}{\mathit{i}}_{\mathit{d}}}{\mathrm{d}\mathit{t}}+\mathit{R}{\mathit{i}}_{\mathit{d}}-\mathit{L}{\mathit{i}}_{\mathit{q}}{\mathit{\omega }}_{\mathrm{e}}\\ {\mathit{u}}_{\mathit{q}}=\mathit{L}\frac{\mathrm{d}{\mathit{i}}_{\mathit{q}}}{\mathrm{d}\mathit{t}}+\mathit{R}{\mathit{i}}_{\mathit{q}}+{\mathit{\omega }}_{\mathrm{e}}(\mathit{L}{\mathit{i}}_{\mathit{d}}+{\mathit{\psi }}_{\mathrm{f}})\end{array}\right.$
$\left\{\begin{array}{l}\mathit{J}\stackrel{·}{\mathit{\omega }}=-{\mathit{d}}_{\mathrm{s}}\mathit{\omega }+\mathit{T}+{\mathit{T}}_{\mathrm{e}}\\ \mathit{T}=\frac{3}{2}\mathit{p}{\mathit{\psi }}_{\mathrm{f}}{\mathit{i}}_{\mathit{q}}\end{array}\right.$

式中:ωe=pω,为电气角速度,其中P为电机极对数,ω为电机机械角速度;L、R分别为定子绕组的自感和电阻;${\mathit{\psi }}_{\mathrm{f}}$为转子磁链;ud、uq分别为定子绕组电压在d、q轴上的分量;ds为阻尼系数;Te为外界扰动力矩。

比例积分(proportionalintegral,PI)控制器具有原理简单、易于实现、适用面广、鲁棒性强、控制参数相互独立、参数整定简单等优点,已在机电控制系统中得到广泛的应用。因此,根据式(31)、式(32)建立的数学模型,设计了基于PI控制器的电动轮椅电机矢量控制策略,如图4所示。该控制策略主要包含PI转速外环(在刹车控制中参考转速ω*=0)与前馈解耦PI电流内环,并最终通过空间矢量脉宽调制算法(space vector pulse width modulation,SVPWM)计算出三相逆变器的控制信号驱动电机运动。

3 实验结果分析

为探究电子刹车系统对电动轮椅制动性能的影响,选取除刹车系统外其余技术参数(如额定载重、初始行驶速度等)一致的电子刹车电动轮椅与常规款电磁刹车电动轮椅作为实验对象,分别在平路、3°坡度路面、6°坡度路面3种工况下开展刹车效果对比实验,通过对比两款轮椅从相同初始速度开始制动至完全停止的行驶距离(即刹车距离),所得两款轮椅行驶速度与刹车距离的对比结果如图5所示。

分析实验结果可知,电子刹车系统因具备响应速度快、控制精度高的技术特点,在水平路面、3°坡路面、6°坡路面等不同坡度路段,以及不同初始行驶速度条件下,其刹车距离均显著小于常规款电动轮椅的刹车距离。

在水平路段,如图5(a)所示,随着行驶速度的增大,电磁刹车电动轮椅与配备电子刹车系统的电动轮椅制动距离均呈单调递增趋势,但电子刹车系统的制动距离始终小于电磁刹车电动轮椅。这是由于电子刹车系统通过实时反电势能反馈与动态制动力分配,优化了制动响应时间与滑行阶段的能量耗散效率,相较于电磁刹车电动轮椅静态制动的局限性,其制动效能的动态适应性更优。

由图5(b)~图5(e)所示,3°上坡与下坡、6°上坡与下坡路况中,因上坡时重力分力会抵消部分动能,下坡时该分力则与动能协同增大制动难度,故上坡的刹车距离优势显著高于下坡。电子刹车系统凭借动态感知反电动势的能力,通过自适应制动力调节,既能在上坡工况优化制动力与动能的匹配,又能在下坡工况有效抑制制动距离的过度延长,且行驶速度越大、路面坡度越大,其提升制动效能的优势越突出,充分体现了电子控制技术对制动过程的优化作用。

刹车时间作为反映制动响应速度的关键指标,对电动轮椅的行驶安全性同样具有重要意义,因此在水平路面、3°坡度路面、6°坡度路面这3种相同工况下,进一步开展刹车时间的对比实验,通过测量两款轮椅从相同初始速度开始制动至完全停止所需的刹车时间,所得两款轮椅行驶速度与刹车时间的对比结果如图6所示。

在实验设定的初始行驶速度梯度下,配备电子刹车系统的电动轮椅,其制动响应速度(定义为从触发制动指令至车制动停止的时间)均显著优于采用电磁刹车的电动轮椅,且该优势在水平路面、3°坡度路面、6°坡度路面等不同工况中保持一致,未因行驶速度或路面坡度变化出现性能偏移,进一步验证了电子刹车系统在响应时效性上的稳定性。

图6(a)中在水平路面条件下,电磁刹车电动轮椅制动刹车时间随速度增加先下降后趋于平稳,电子刹车电动轮椅的刹车时间持续下降且全程短于电磁刹车轮椅制动。

在3°坡路面,上坡时间如图6(b)所示,电磁刹车电动轮椅制动刹车时间波动且整体偏高,电子刹车电动轮椅刹车时间随速度增加逐渐降低,二者差距随速度增大更明显。下坡时,如图6(c)所示,两者刹车时间均有波动,电子刹车电动轮椅多数情况下更短,说明下坡时电子控制仍能改善制动响应,但下坡时重力分力与制动的耦合更复杂,导致趋势存在波动。

整体而言,3°上坡时,轮椅重力沿坡面的分力与行驶方向相反,对运动形成阻力。可通过实时感知精准预判动能与坡度分力的平衡关系,提前触发制动并动态分配制动力,减少制动延迟与无效滑行,随着速度增大,电子系统对动能-坡度分力的动态调控更高效,进一步压缩了刹车时间。而电磁刹车电动轮椅制动缺乏这种动态精准调控,刹车时间波动且更长,因此电子刹车电动轮椅的电子刹车在3°上坡的优势更突出,且速度越大,电子系统的精准调控越能体现刹车时间缩短的效果。

在6°坡面时,如图6(d)和图6(e)所示,两者刹车时间均随速度增加而上升,且变化趋势接近,因大坡度下坡时重力分力显著助推轮椅运动,动能快速累积,两种制动系统的效能均受此强约束,制动力调节空间被大幅压缩,故差距缩小。但电子刹车电动轮椅的电子刹车控制相对平稳且始终更短,大坡度上坡时电子控制仍能稳定缩短刹车时间。

可见基于水平路面、3°坡路面、6°坡路面3种典型工况及不同初始行驶速度梯度的对比实验数据,配备电子刹车系统的电动轮椅,在制动过程中具备明确的技术优势,可实时检测电机制动时产生的反电势能,并基于该信号即时转化输出阻碍轮椅前进的制动力矩,使其在制动性能的两项关键指标上均显著优于采用常规电磁刹车系统的电动轮椅。

为进一步验证电子刹车系统电机的能效特性及优势,在水泥路面与柏油路面,设置100 kg和70 kg两种负载等级,在不同档位模式下,采用示波器对配备电子刹车系统的电子刹车电动轮椅电机与电磁刹车电动轮椅电机的电流进行定量检测,实验结果如图7所示。

电磁刹车电动轮椅电机的电流随档位提升呈显著的非线性递增趋势,而电子刹车电动轮椅电机的电流在全档位、全负载及全路况下均保持稳定且处于低水平区间。在水泥路面[图7(a)、图7(b)]与柏油路面[图7(c)、图7(d)]场景中,无论负载为100 kg 还是70 kg,电子刹车电动轮椅电机的电流特性均展现出优异的工况鲁棒性,其电流未因档位升级、负载变化或路面附着特性差异而出现明显波动。

而电磁刹车电动轮椅电机,其电流不仅随档位升高呈现功率需求驱动的陡增趋势,且受负载与路面类型的耦合影响表现出较强的工况敏感性。

同时配备电子刹车系统的电动轮椅电机通过动态反电动势反馈控制与制动能量回收,实现了电机输出功率与多工况的精准适配,有效削减了无效电能耗散,而电磁刹车电动轮椅电机因缺乏此类动态优化机制,需通过大幅提升电流以满足档位提升后的功率需求,且其静态功率匹配模式易受负载、路面等外部约束条件的干扰,导致电流稳定性不足、能效表现欠佳。

综上所述,配备电子刹车系统的电动轮椅电机在多路况、多负载、多档位的复杂工况下,均呈现出电流更低、稳定性更强的优势,优于现使用的电磁刹车电动轮椅电机。

4 结论

(1)建立电动轮椅车轮的行走模型,分析了轮子在行走过程中的力学平衡条件;考虑到轮椅在水平路面、3°坡度路面、6°坡度路面和不同道路上行驶的影响,依据轮子与地面的作用力和刹车力分析,明确了轮子在侧倾与俯仰条件下的动力学模型,形成了摩擦力的表达式。

(2)研究了电动轮椅刹车装置的控制器,并给出了SVPWM的控制流程,实验结果表明该轮椅的电子刹车系统凭借动态感知反电动势的能力,通过自适应制动力调节,既能在上坡工况优化制动力与动能的匹配,又能在下坡工况有效抑制制动距离的过度延长,体现了电子控制技术对制动过程的优化作用,制动效果明显优于常规轮椅的刹车装置。

参考文献

[1]

刘辉, 王川, 葛俊. 电动轮椅颠簸路面行驶状态研究[J]. 黄冈师范学院学报, 2024, 44(5): 16-19.

[2]

Liu Hui, Wang Chuan, Ge Jun. Research on driving status of electric wheelchairs on rough roads[J]. Journal of Huanggang Normal University, 2024, 44(5): 16-19.

[3]

戴士杰, 刘若娇, 张慧博. 基于Mecanum轮的电动轮椅与路面耦合系统振动特性分析[J]. 振动与冲击, 2020, 39(7): 245-252.

[4]

Dai Shijie, Liu Ruojiao, Zhang Huibo. Vibration characteristic analysis of coupling system between Mecanum wheel-based electric wheelchair and road surface[J]. Journal of Vibration and Shock, 2020, 39(7): 245-252.

[5]

田英, 佘阳, 黎铸新, 等. 一种多功能越障轮椅的结构设计与仿真分析[J]. 机电工程技术, 2020, 49(7): 7-10.

[6]

Tian Ying, She Yang, Li Zhuxin, et al. Structural design and simulation analysis of a multifunctional obstacle-climbing wheelchair[J]. Mechanical & Electrical Engineering Technology, 2020, 49(7): 7-10.

[7]

张庆松, 苏宁, 梁艺. 电动轮椅车检验常见问题分析[J]. 中国医疗器械信息, 2019, 25(13): 19-20.

[8]

Zhang Qingsong, Su Ning, Liang Yi. Analysis of common problems in electric wheelchair inspection[J]. China Medical Device Information, 2019, 25(13): 19-20.

[9]

孟楠, 方敏, 袁浩森, 等. 智能电动轮椅的关键技术分析[J]. 电动工具, 2023(6): 30-33.

[10]

Meng Nan, Fang Min, Yuan Haosen, et al. Analysis of key technologies for intelligent electric wheelchairs[J]. Electric Tools, 2023(6): 30-33.

[11]

王延伟, 王和尧, 杨景琦, 等. 电动轮椅辅助安全系统设计[J]. 科学技术创新, 2022, 36: 193-196.

[12]

Wang Yanwei, Wang Heyao, Yang Jingqi, et al. Design of auxiliary safety system for electric wheelchairs[J]. Science and Technology Innovation, 2022, 36: 193-196.

[13]

郎召伟, 李屹, 金江波, 等. 电磁制动器设计及制动特性分析[J]. 机械工程与自动化, 2021(3): 67-70.

[14]

Lang Zhaowei, Li Yi, Jin Jingbo, et al. Design and braking characteristic analysis of electromagnetic brake[J]. Mechanical Engineering and Automation, 2021(3): 67-70.

[15]

刘冲冲, 刘小川, 许勇, 等. 起落架系统刹车走步动力学特性研究[J]. 振动工程学报, 2024, 37(4): 708-715.

[16]

Liu Chongchong, Liu Xiaochuan, Xu Yong, et al. Research on dynamic characteristics of landing gear braking system[J]. Journal of Vibration Engineering, 2024, 37(4): 708-715.

[17]

Doumiati M. Embedded estimation of vehicle's vertical and lateral tire forces for behavior diagnosis on the road[D]. Compiègne: University of Technology of Compiegne, 2009.

[18]

Ryu J, Gerdes J C. Estimation of vehicle roll and road bank angle[C]//Proceedings of the 2004 American Control Conference. Piscataway: IEEE, 2004: 2110-2115.

[19]

Jiang K, Pavelescu A, Victorino A, et al. Estimation of vehicle's vertical and lateral tire forces considering road angle and road irregularity[C]//Proceedings of 17th International IEEE Conference on Intelligent Transportation Systems. New York: IEEE, 2014: 185-190.

[20]

Martens J, Brown T, Hac A. Detection of vehicle rollover[C]//Proceedings of the 2004 SAE World Congress. Detroit: SAE, 2004: 1-11.

[21]

Baffet G. Experimental evaluationofobservers for tire-road forces, sideslipangle and wheel cornering stiffness[J]. Vehicle System Dynamics, 2008, 46(6): 501-520.

[22]

Abdullah M A, Jamil J F, Mohan A E. Vehicle dynamics modeling & simulation[M]. Malacca: Centre for Advanced Research on Energy (CARe), Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, 2016.

[23]

Baffet G, Charara A, Dherbomez G. An observer of tire-road forces and friction for active security vehicle systems[J]. Mechatronics, IEEE/ASME Transactions, 2007, 12(6): 651-661.

[24]

Dixon W E, Walker L D, Dawson D M. Fault detection for wheeled mobile robots with parametric uncertainty[C]//Proceedings of the 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. New York: IEEE/ASME, 2001: 1245-1250.

[25]

Doumiati M, Victorino A, Charara A, et al. An estimation process for vehicle wheel-ground contact normal forces[C]//Proceedings of the 17th IFAC World Congress. Seoul: IFAC, 2008: 6075-6080.

[26]

Onyango S O, Hamam Y, Djouani K. Velocity and orientation control in an electrical wheelchair on an inclined and slippery surface[C]//Proceedings of the 8th International Conference on Informatics in Control, Automation and Robotics. Noordwijkerhout: SciTePress, 2011: 112-119.

[27]

Fierro R, Lewis F. Control of a nonholonomic mobile robot: backstepping kinematics into dynamics[J]. Journal of Robotic Systems, 1997, 14(3): 149-164.

基金资助

浙江省“尖兵”攻关计划(2023C01015)

浙江省“尖兵”攻关计划(2024C01004)

PDF (6004KB)

0

访问

0

被引

详细

导航
相关文章

/

〈 〉