双螺杆空压机消声器设计与性能分析

何旭阳 ,  何亚银 ,  张炜 ,  王凯

科学技术与工程 ›› 2024, Vol. 24 ›› Issue (8) :3222-3228

PDF (2093KB)
科学技术与工程 ›› 2024, Vol. 24 ›› Issue (8) :3222-3228 DOI: 10.12404/j.issn.1671-1815.2301401
机械、仪表工业

双螺杆空压机消声器设计与性能分析

作者信息 +

Design and Performance Analysis of Muffler for Twin-screw Air Compressor

Author information +
文章历史 +

摘要

针对双螺杆空压机在工作过程中壳体产生较大噪声的问题,利用有限元分析技术,对空压机壳体进行噪声频谱研究,得到在100 ~ 1 500 Hz时,双螺杆空压机壳体噪声频谱图。采用添加消声器的方法进行降噪处理,并对消声器进行了结构优化设计,消除了谐振现象;将所设计的消声器安装在双螺杆空压机吸气口处,对比发现该消声器具有较好的降噪效果。研究成果可对双螺杆空压机降噪起到一定的参考作用。

Abstract

In order to solve the problem that the shell of twin screw air compressor produces large noise during operation, the noise spectrum of the shell of the twin screw air compressor was studied by using finite element analysis technology, and the noise spectrum diagram of the shell of the twin screw air compressor was obtained at 100 ~ 1 500 Hz. Noise reduction was carried out by adding a muffler, and the structure of the muffler was optimized to eliminate the resonance phenomenon. The designed muffler was installed at the suction port of twin-screw air compressor. It is found that the muffler has better noise reduction effect. The research results can play a certain reference role for noise reduction of twin-screw air compressor.

引用本文

引用格式 ▾
何旭阳, 何亚银, 张炜, 王凯. 双螺杆空压机消声器设计与性能分析[J]. 科学技术与工程, 2024, 24(8): 3222-3228 DOI:10.12404/j.issn.1671-1815.2301401
HE Xu-yang, HE Ya-yin, ZHANG Wei, WANG Kai. Design and Performance Analysis of Muffler for Twin-screw Air Compressor[J]. Science Technology and Engineering, 2024, 24(8): 3222-3228 DOI:10.12404/j.issn.1671-1815.2301401

登录浏览全文

4963

注册一个新账户 忘记密码

参考文献

基金资助

陕西省科技厅重点研发项目(2017ZDXM-GY-138)

PDF (2093KB)

30

访问

0

被引

详细

导航
相关文章

/

〈 〉