平面移动式立体车库指令动态调整优化方法
DOI:
作者:
作者单位:

西南交通大学机械工程学院

作者简介:

通讯作者:

中图分类号:

TP391

基金项目:

中车十四五科技重大专项科研课题(2021CHZ010-3);四川省重点研发项目(2022YFG0241);国家自然科学基金(51675450)。


Optimization Method for Dynamic Adjustment of Instructions in Planar Mobile Stereoscopic Garage
Author:
Affiliation:

School of Mechanical Engineering, Southwest Jiaotong University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    平面移动式立体车库进行批量出入库作业时,其中系统指令的顺序不同以及有轨制导车(Rail guided vehicle,RGV)的滞留位置会改变载车电梯与RGV的交互时间以及RGV的利用率高低,都会影响整个系统的出入库作业时间。为减少立体车库作业时间,针对平面移动式立体车库的作业流程,通过建立实时库位信息模型,载车电梯与RGV协同作业模型,并在动态时间阈值下对RGV出库指令中库位坐标进行调整。然后以作业时间为目标函数,提出一种改进灰狼算法进行求解。仿真结果表明:与原始灰狼算法与遗传算法相比,改进灰狼算法在寻优与鲁棒性方面具有更好的优异性能,并能有效缩短平面移动式立体车库的作业时间,提高了出入库效率。

    Abstract:

    When conducting batch inbound and outbound operations in a planar mobile three-dimensional garage, the different order of system commands and the detention position of Rail guided vehicles (RGVs) can change the interaction time between the elevator and RGVs, as well as the utilization rate of RGVs, which will affect the overall inbound and outbound operation time of the system. To reduce the operation time of the three-dimensional garage, a real-time warehouse location information model was established for the operation process of the planar mobile three-dimensional garage. A collaborative operation model between the car elevator and the RGV was established, and the warehouse location coordinates in the RGV outbound command were adjusted under dynamic time thresholds. Then, taking the homework time as the objective function, an improved Grey Wolf algorithm is proposed for solving. The simulation results show that compared with the original grey wolf algorithm and genetic algorithm, the improved grey wolf algorithm has better performance in optimization and robustness, and can effectively shorten the operation time of the planar mobile three-dimensional garage, improving the efficiency of inbound and outbound operations.

    参考文献
    相似文献
    引证文献
引用本文

丰睿,程文明,杜润. 平面移动式立体车库指令动态调整优化方法[J]. 科学技术与工程, , ():

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2023-04-24
  • 最后修改日期:2023-11-14
  • 录用日期:2023-11-16
  • 在线发布日期:
  • 出版日期:
×
亟待确认版面费归属稿件,敬请作者关注