黄土场地水平受荷桩的应变楔计算方法改进
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TU 470

基金项目:

国家自然科学(黄土地区悬臂式矩形抗滑桩嵌固段桩前被动土拱的形成机理及演化过程 41877285;黄土地区混凝土螺纹桩复合地基承载机理及设计方法研究 42077248)


Improvement of Strain Wedge Calculation Method of Horizontally Loaded Piles in Loess Site
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    应变楔方法是一种能较好地考虑桩土相互作用和土的非线性本构关系的水平受荷桩理论计算方法,桩-土相互作用模式和土的本构关系是应变楔方法研究的切入点和难点。在已有应变楔模型的研究基础上,结合结构性黄土联合强度,将黄土的抗拉强度引入应变楔法计算中,对桩前应变楔土体的水平应力增量?σh、发挥摩擦角φm和桩侧剪应力τ做出改进,并通过算例验证了本文改进计算方法的适用性。计算结果表明:本文改进计算方法适用于黄土场地水平受荷桩的计算,迭代算法和流程可靠;考虑黄土抗拉强度的水平应力增量?σh和桩侧剪应力τ的计算值略微偏小,发挥摩擦角φm的计算值会略微偏大,导致考虑黄土抗拉强度的桩顶位移和桩身弯矩最大值比不考虑黄土抗拉强度的计算值略微偏小,但和现场试验实测结果基本一致。

    Abstract:

    The strain wedge method is a theoretical calculation method for horizontally loaded piles that can better consider the pile-soil interaction and the nonlinear constitutive relationship of the soil. The pile-soil interaction model and the constitutive relationship of the soil are the entry points and difficulties in the study of strain wedge method. Based on the current research on the corresponding variable wedge method, combined with the joint strength of the structural loess, the tensile strength of the loess is introduced into the calculation of the strain wedge method.to calculate the horizontal stress increment ?σh, the friction angle φm and the pile side shear stress τ. The applicability of the improved calculation method in this paper is verified through a calculation example. The calculation results show that the improved calculation method in this paper is suitable for the calculation of horizontally loaded piles in loess sites and the iterative algorithm and process are reliable; when considering the tensile strength of the loess, the calculated values of the horizontal stress increment ?σh and the pile side shear stress τ are slightly smaller and the calculated value of the exerted friction angle φm is slightly larger, which resulting in the calculated value of the pile top displacement and the maximum value of pile body bending moment are slightly smaller than the calculated value without considering the tensile strength of loess. But it is basically consistent with the actual measurement results of the field test.

    参考文献
    相似文献
    引证文献
引用本文

潘瑞,罗丽娟,刘安龙,等. 黄土场地水平受荷桩的应变楔计算方法改进[J]. 科学技术与工程, 2023, 23(21): 9219-9225.
Pan Rui, Luo Lijuan, Liu Anlong, et al. Improvement of Strain Wedge Calculation Method of Horizontally Loaded Piles in Loess Site[J]. Science Technology and Engineering,2023,23(21):9219-9225.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2022-08-05
  • 最后修改日期:2022-12-23
  • 录用日期:2022-12-29
  • 在线发布日期: 2023-07-25
  • 出版日期:
×
律回春渐,新元肇启|《科学技术与工程》编辑部恭祝新岁!
亟待确认版面费归属稿件,敬请作者关注